Programming Time and Date

Special Note: The following instructions for changing the time & date are for the most common software version. The actual programming steps may differ in some ways, depending on the system software. If you are unsure if these are the proper steps, click here to determine your software version.

To enter a programming session, follow the next few simple steps:

1) Press FEATURE * * 2 6 6 3 4 4

2) Enter Password: 2 6 6 3 4 4

Display will read: " Terminals & Sets"

Using the navigation keys, as displayed below, follow the next simple steps:

3) Press: NEXT

Display will read: "Lines"

4) Press: Next

Display will read: "Services"

5) Press: Next

  Display will read: "System Speed Dial"

7) Press: Next

Display will read: "Passwords"

8) Press: Next

Display will read: "Time and Date"

9) Press: Show

Display will read: "Hour: __"

10) Press: Change "softkey"

Enter the hour

Display will read: A.M. O.K  or Change "softkey"

Select which one you want to change

11) Press: NEXT

Display will read: "Minutes: __"

Press change or o.k. "softkey"

12) Press: NEXT

Display will read: "Year: __"

Press next or change "softkey"

13) Press: NEXT

Display will read: "Month: __"

Press next or change "softkey"

14) Press: NEXT

Display will read: "Day: __"

Press next or change "softkey"

15) Press: Next

Congratulations! Your Time and  Date has now been programmed!