DR5 / DR5.1 / R1T1 / 1.0
/ 1.1
Compact 308 - - - Compact
616 - - - Modular 824 - - - MICS
Adding
a LINE to a phone
IMPORTANT: PRIOR TO ADDING
OR REMOVING A LINE TO YOUR PHONE, YOU MUST KNOW WHAT THE SYSTEM LINE NUMBER
IS. PLEASE ASK YOUR INSTALLER THE SYSTEM LINE NUMBER PRIOR TO PROCEEDING
To enter a programming session, follow the
next few simple steps:
1) Press FEATURE * * 2 6 6 3 4 4
2) Enter Password: 2 6 6 3 4 4
Display will read: " A.
Configuration"
Using the navigation keys, as displayed below,
follow the next simple steps:
3) Press: SHOW
Display will read: "1. Trk/Line
Data"
4) Press: NEXT
Display will read: "2. Line
Access"
5) Press: SHOW
Display will read: "Show set:
___"
6) Enter the Extension number you wish to
make changes to.
Display will read: "Line
assignment"
7) Press: SHOW
Display will read: "Line 01
assigned"
8) Press: ADD
Display will read: "Add line: __"
9) Enter the Line number you wish to add.
Display will read: "Line ##
assigned"
10) Press: HEADING
Display will read: "Line
assignment"
11) Press: NEXT
Display will read: "Answer DNs"
12) Press: NEXT
Display will read: "Ringing"
13) Press: SHOW
Display will read: "Line01: Ring"
14) Press: NEXT until you see the
line number you just added in step 6
15) Press the CHANGE softkey until the
line is set to either RING or No Ring, whichever you prefer.
16) Press: NEXT
17)
Press the RLS key.
Congratulations! You have successfully added a
Line to your phone!
|