DR5 / DR5.1 / R1T1 / 1.0
/ 1.1
Compact 308 - - - Compact
616 - - - Modular 824 - - - MICS
Programming
a NEW LINE into the system
IMPORTANT: PRIOR TO ADDING
OR REMOVING A LINE TO YOUR SYSTEM, YOU MUST KNOW WHAT THE SYSTEM LINE NUMBER
IS. PLEASE ASK YOUR INSTALLER THE SYSTEM LINE NUMBER PRIOR TO PROCEEDING
To enter a programming session, follow the
next few simple steps:
1) Press FEATURE * * 2 6 6 3 4 4
2) Enter Password: 2 6 6 3 4 4
Display will read: "
Configuration"
Using the navigation keys, as displayed below,
follow the next simple steps:
3) Press: SHOW
Display will read: "Trk/Line
Data"
4) Press: SHOW
Display will read: "Show Line: _ _
_"
5) Enter the System Line Number you
wish to add. Ex. 001, 002 etc.
Display will read: "Trunk
Data"
6) Press: SHOW
Display will read: "Trunk Mode: Unspr"
7) Press the CHANGE
softkey until the display reads "Super"
8) Press: NEXT until the display
reads: "Line Type: Public
9) Press the CHANGE
softkey until the display reads the desired setting.
10) Press: NEXT
11) Press: RLS
Congratulations! You have successfully added a
line to your system!
|