DR5 / DR5.1 / R1T1 / 1.0 / 1.1

Compact 308 - - - Compact 616 - - - Modular 824 - - - MICS

Programming System Speed Dials

To enter a programming session, follow the next few simple steps:

1) Press FEATURE * * 2 6 6 3 4 4

2) Enter Password: 2 6 6 3 4 4

Display will read: " A. Configuration"

Using the navigation keys, as displayed below, follow the next simple steps:

3) Press: NEXT

Display will read: "B. General Admin"

4) Press: SHOW

Display will read: "1. Sys speed dial"

5) Press: SHOW

6) Display will read: "Speed Dial #:___"

HINT: Begin your system Speed Dials with "01"

7) Enter: 01 or 02 or 03 etc...

Display will read: "Speed dial #:01"

8) Press: SHOW

Display will read: "No number stored"

9) Press the "CHANGE"softkey.

Display will read: "#01:

10) Enter the Speed Dial number

Press the "OK" softkey.

11) Press: NEXT

Display will read: "Use prime line"

12) Press: NEXT

Display will read: "Display digits:Y"

13) Press: NEXT

Display will read: "Bypass restr'n:N"

14) Press: NEXT

Speed dial 01 has now been programmed:

To program another Speed Dial Number, repeat steps 6 thru 14.