DR5 / DR5.1 / R1T1 / 1.0 / 1.1

Compact 308 - - - Compact 616 - - - Modular 824 - - - MICS

Programming System Time & Date

To enter a programming session, follow the next few simple steps:

1) Press FEATURE * * 2 6 6 3 4 4

2) Enter Password: 2 6 6 3 4 4

Display will read: " A. Configuration"

Using the navigation keys, as displayed below, follow the next simple steps:

3) Press: NEXT

Display will read: "B. General Admin"

5) Press: SHOW

Display will read: "1. Sys speed dial"

6) Press: NEXT

Display will read: "2. Names"

7) Press: NEXT

Display will read: "3. Time and date"

8) Press: SHOW

Display will read: "Time # # : # #"  (Your current setting)

TO CHANGE THE TIME,go to step 9).

TO CHANGE THE DATE, go to step 15)

9) Press the CHANGE softkey

Display will read: "Hour:

10) Press the CHANGE softkey

Display will read: "Hour: _ "

11) Enter the new HOUR. (in military format - Ex.: 5:00pm = 17:00)

Display will then read the new Hour programmed.

12) Press NEXT

Display will read: "Minutes: # # "

13) Press the CHANGE softkey

Display will read: "Minutes": _ "

14) Enter the new MINUTES.

Congratulations! Your time has now been programmed!

15) Press NEXT

Display will read: "Date DD MM YY"

16) Press the CHANGE softkey

Display will read: "Year: # # "

17) Press the CHANGE softkey, (If the year is incorrect)

Display will read: "Year: _ "

18) Enter the new YEAR

Display will then read the new Year programmed.

19) Press NEXT

Display will read: "Month: # # "

20) Press the CHANGE softkey, (If the month is incorrect)

Display will read: "Month: _ "

21) Enter the new MONTH

Display will then read the new Month programmed

22) Press NEXT

Display will read: "Month: # # "

23) Press the CHANGE softkey, (If the day is incorrect)

Display will read: "Day: _ "

21) Enter the new DAY

Display will then read the new Day programmed

Congratulations! Your Date has now been programmed!

Press the RLS key.